null
Created with Sketch. Created with Sketch.
Flat Rate Shipping!

Miscellaneous


  • Mayhew #1 X 2 Cats Paw Phillips Screwdriver DGKT45000

    #1 X 2 Cats Paw Phillips Screwdriver

    Features and Benefits: Used to fasten and unfasten screws in almost any setting with a phillips bit Designed with an extended blade forged with a capped end Hex bolster for use with a wrench for increased torque Black oxide tip for a better...

    $10.44 $7.24
    Add to Cart
  • Mayhew #10 Pneumatic Pilot Punch DGKT31952

    #10 Pneumatic Pilot Punch

    Features and Benefits 3/8" Pneumatic Pilot Punch Used with a pneumatic tool Heavy duty S2 steel Black oxide finish for additional rust protection Made in the USARoll pin punches are used to drive out roll pins or spring pins. These ...

    $17.96 $12.58
    Add to Cart
  • Mayhew #8 Pneumatic Pilot Punch DGKT31950

    #8 Pneumatic Pilot Punch

    Features and Benefits 1/4" Pneumatic Pilot Punch Used with a pneumatic tool Heavy duty S2 steel Black oxide finish for additional rust protection Made in the USARoll pin punches are used to drive out roll pins or spring pins. These ...

    $17.96 $12.58
    Add to Cart
  • Mayhew #9 Pneumatic Pilot Punch DGKT31951

    #9 Pneumatic Pilot Punch

    Features and Benefits 5/16" Pneumatic Pilot Punch Used with a pneumatic tool Heavy duty S2 steel Black oxide finish for additional rust protection Made in the USARoll pin punches are used to drive out roll pins or spring pins. These ...

    $17.96 $12.58
    Add to Cart
  • K Tool International 0-4 Bearing Seperator BFGS70384

    0-4 Bearing Seperator

    Features and Benefits: Removes generator gears, bearing cones, bearings and similar parts that puller jaws cannot reach Designed to reduce risk of damage to part Flush knife-edge blades get behind work where most puller jaws cannot fit or grip ...

    $59.10 $41.65
    Add to Cart
  • Central Tools 0-6/0-150Mm Carbon Fiber Digital Caliper BWBJ3C351

    0-6"/0-150mm Carbon Fiber Digital Caliper

    Features and Benefits: Low cost digital caliper Carbon fiber for extra rigidity Inch, Metric and Fractional reading with the push of a button Easy to read digital display 4 measurements, Inside, outside, depth and stepThis carbon fiber...

    $24.91 $17.44
    Add to Cart
  • K Tool International 1 Inch Drive 1 1/2-13/16 Squar BFGS35028

    1 Inch drive 1 1/2-13/16 Squar

    Features and Benefits:Manufactured from chrome-moly steelHeat treated for wear in professional, rugged environmentsDesigned for outer cap nuts on Budd style truck wheelsFor most American-made trucks with dual rear wheelsFor use with 1" drive...

    $31.24 $21.94
    Add to Cart
  • Ullman Devices Corp 1 Replacement Head DSFVE2HD

    1 Replacement Head

    Featuresand Benefits:Overall Height: 1/4"Mirror Diameter: 1-1/4"Mirror Shape: RoundFits 1-1/4" round inspection mirrorsMirror head assembly onlyHigh quality at an affordable priceExpertly made from premium materialsBuilt to match your exact...

    $3.69 $2.53
    Add to Cart
  • Titan Products 1 Extra Long 40 Breaker Bar FCDV12049

    1" Extra Long 40" Breaker Bar

    1” Dr head swivels 180° Heavy duty chrome vanadium steel construction Maximum torque: 1855 ft-lbs (256 kg/m) Chrome plated bar and black oxide finish head to resist corrosion

    $114.05 $83.73
    Add to Cart
  • Mayhew 1 X 12 Black Oxide Cold Chisel DGKT10221

    1" X 12" Black Oxide Cold Chisel

    Features and Benefits: Used to cut and shape metals softer than the cutting edge of the chisel Cutting edge angle designed to provide greater strength Not intended to be used on masonry materials Black oxide finish American made...

    $22.51 $15.76
    Add to Cart
  • Mayhew 1-1/4 Diameter Inspection Mirror DGKT17951

    1-1/4" Diameter Inspection Mirror

    Features & Benefits:1-¼” round scratch resistant glass mirrorPivoting ball joint allows for multiple viewing anglesTelescoping stainless steel handle extends from 8-¼” to 36-¼”Cushioned handle provides a secure grip under the toughest work...

    $11.25 $7.80
    Add to Cart
  • S and G Tool Aid 1-1/4 Smoothing Hammer DHVQ92150

    1-1/4" Smoothing Hammer

    Features and Benefits: Excellent for any hammering operations such as ball joints and U-joints .498" Parker shank pneumatic chisel

    $29.29 $20.57
    Add to Cart
  • Mayhew 1-1/8 - 29Mm Separating Fork DGKT31934

    1-1/8" - 29mm Separating Fork

    Features and Benefits: Pneumatic Separating Fork Lifetime Warranty Heavy Duty Alloy Tool Steel Black oxide finish for additional rust protection .401 Parker ShankSeparate ball joints and tie rods quickly and easily with a ball joint ...

    $61.01 $32.21
    Add to Cart
  • Blair 1-1/8 Dia Holecutter BSJC14636

    1-1/8" Dia Holecutter

    Features and Benefits:10 TIMES LONGER LIFE than normal metal cutting hole cuttersProvide fast and precise cuts into stainless steel, sheet metal, FRP and woodSmooth cuts with perfect cutting resultPrecision ground, heat treated tools made from M2 HSS...

    $32.78 $14.98
    Add to Cart